![](https://cloud.app.net/xpb6/0d/c7/post-ab43e1aa-31e0-4662-88bb-a52eb2ac8078/cover.jpg?upd=20201123062951)
2020 Newest Full height turnstile installation manual
How to install full height turnstile gate? Full height turnstile installation manual from Mairsturnstile, including detailed introduction and points for attention. The installation of full height turnstile gate plays an important role in it’s usage and life, and plays an important role in whether the user can pass through the channel quickly and effectively and the personal safety of the user himself. The main components of the full height turnstiles are integrated by electronic, microprocessor control and mechanical identification technology, and the compatibility is very good. It is convenient to use card reading identification equipment such as IC card, ID card, bar code card, QR code, fingerprint and so on. It is a high-tech product for intelligent management of personnel passage, Through the selection of various identification system equipment and the use of reliable security protection device, a report Alarm device, direction indication and so on, coordinate to realize the intelligent control and management of the channel. So how should we install high-end full height turnstiles like this? How to reasonably install the full height turnstile access control system, and What should we pay attention to during the installation process, the following is a detailed introduction, Full height turnstile installation manual from Mairsturnstile. I.Make reasonable solution before installation Prior to installation, timely and complete communication with customers to understand the site environment to determine the plan: Make the plan according to the environmental situation of the site. The installation site is open-air or indoor use, if open-air use, we should choose full height turnstile gate access control system with waterproof box, in order to prevent the corrosion of the circuit board by overcast weather. Depending on the working environment, the choice of waterproof box material is also different. In the north, an iron waterproof box and temperature control system should be used, while in the south, a plastic waterproof box and scattered temperature system should be used. According to the width and length of the field channel, determine the number and shape of the full height turnstile gate with access control system, such as the vertical full height turnstile gate access control system, or the bridge full height turnstile gate access control system, Vertical full height turnstile access control system shape size: in determining the selection, fully consider the gap between the gate equipment and the gate rod (the gap between the gate rod and the chassis is generally 50 mm), the area of each full height turnstile gate with access control system, setting of body position. Choose the wiring mode (whether it is a bright line or a dark line) and the communication mode of the controller according to the distance between the main control computer and the all full height turnstile access control system (the distance between the general computer and the all full height turnstile access control system is less than 800 meters). We recommend 485 communication, above 800 meters we choose TCP network communication (need to transfer). II. Preparation before installation. Two plastic pipes of 6 charge to 8 charges should be slotted in the field before installation according to the actual size of the full height turnstile gate. The gap between the gate equipment and the gate equipment is 50-100 mm, which is convenient to open the top cover, adjust the gate equipment machine and maintain, and so on. One hose goes through the power line (strong electricity), the other hose goes through the signal line (weak electricity), the gate manufacturer can not take the power line and the signal line at the same time, which will cause poor communication effect and hidden danger of safety. The pipe should be exposed to the ground 30-40 mm door the system should be good at the bottom of the middle of the machine, and the bridge type full height turnstile gate access control system should be good on both sides (because the middle bottom of the bridge type full height turnstile gate is closed middle is not convenient maintenance and safety risks, general power lines have aging years, to be overhauled once a year).